I haven't actually seen it, but it was reported in the KP management group. We're waiting for someone to have time to inspect it and make a decision on fixing it or pulling it out.
https://imgur.com/a/rVlxxfl
It's hard to source spare nozzles for Powers Pure150-pro epoxy and it seems a shame to use a nozzle and glue on a non-critical hold.
Also depending on the size it may need pinning rather than gluing which is a larger job.
I'll bring the glue tomorrow and see how it looks.
This is a bit off-topic but if unused Powers Pure 150 glue is re-capped as soon as you've finished squirting it into the holes, how much longer will it keep in the tubes before going off?
Adrian there a use by date on the bottle. Once you've opened it if you store it correctly it should be good till the use by date. Have you finished bolting that route or are there still just holes in the cliff?
Zac, thanks for this information. Still just holes. Will be going back on Wednesday to finish the job. I bought the glue last week. Use-by date is some time well into 2021.
hipyhop
I did some gluing today using Powers 150 Pure. Afterwards I was able to wash the nozzle clean using mains pressure tap water, for subsequent use. Adrian.
hipyhop logged a warning 3 years ago. Resolved
Rock Large loose block above 2nd bolt
A large crack has appeared and is growing in a block above and left of the second bolt.