Por favor, ten en cuenta que utilizamos cookies para mejorar el uso de esta página web. Al continuar navegando por la página, aceptas Política de uso de theCrag.
Estoy de acuerdo
Starts downhill and to the left on the taller spire. Look for the chimney system that goes up -- the climb starts in/up this chimney.
This is not your usual EPC 5.9; it is solid in the grade, not closely bolted, and a lot of crack work, rather than face climbing. Having some gear to supplement the missing bolt and the old iron pitons is a good idea unless you are completely solid at 5.9.
5.7: Climb up blocky/vegetated ledges passed a few bolts to the anchor. Slightly runout but well protected where it counts.
5.9: Follow the crack making use of jamming/chimney/dihedral technique passing a few bolts and old Mexican irons. At one of the Mexican irons, look out right for a bolt, you should come out of the crack and make your way up a bolted slab to the anchor. Continuing in the crack will lead you to unprotectable (without trad gear) moves that are slightly harder than 5.9.
5.10-: A quick boulder problem allowing you to stand on top of the pillar. Uncomforatble belay.
There is a short 3rd pitch to the top of the pillar on one bolt and old iron rings (or gear). It is short, but steep. There is a new anchor at the top with two hangers, there is also a rappel down the south side from the top.
Descend by rappelling down "Getting Wood". With twin 70m ropes you can make it down in a single rappel. 60m would also probably work but this is untested at the moment.